Bently Nevada 330104-04-10-05-01-CN 3300 XL 8mm Proximity Probe
Product Basics
Brand: Bently Nevada (Made in USA)
Model: 330104-04-10-05-01-CN (Code details)
- 04: 40mm unthreaded length
- 10: 100mm total case length
- 05: 0.5m (1.6ft) total cable length
- 01: Small ClickLoc connector with protector (standard cable)
- CN: Country-specific approvals
Key Tech Specs
DC Resistance: 7.45Ω ±0.50 (0.5m probe)
Output Resistance: 50Ω
Materials:
- Tip: PPS plastic (heat-safe)
- Case: 303/304 stainless steel (rust-proof)
- Seal: Viton O-ring (stops pressure leaks)
How It Works
Works with: 3300-series 5mm/8mm probes
Power Needed: -17.5V to -26V DC (12mA max)
Stability: <2mV output change per volt input
Test Conditions
Tested at: 18°C-27°C, up to 2000m altitude
Setup: -24V DC power, 10kΩ load, AISI 4140 steel target
Gap: 1.27mm (50 mils)
Important Notes
Performance applies to full 3300 XL 8mm systems only.
Not for use with non-AISI 4140 steel targets.
%20Model:%20330104-04-10-05-01-CN%20(Code%20details)%2004:%2040mm%20unthreaded%20length%2010:%20100mm%20total%20case%20length%2005:%200.5m%20(1.6ft)%20total%20cable%20length%2001:%20Small%20ClickLoc%20connector%20with%20protector%20(standard%20cable)%20CN:%20Country-specific%20approvals%20Key%20Tech%20Specs%20DC%20Resistance:%207.45Ω%20±0.50%20(0.5m%20probe)%20%5B…%5D&media=https://www.worldofplc.com/wp-content/uploads/2025/06/330102-3300-XL-8-mm-Probe-11-3.webp){kind=link}
Reviews
There are no reviews yet.