Bently Nevada | 330904-08-15-10-02-05 3300 NSv Proximity Probe

Bently Nevada 330904-08-15-10-02-05 3300 NSv Proximity Probe

Get the new and original Bently Nevada 3300 NSv proximity probe. This model 330904-08-15-10-02-05 comes in factory packing with a 12-month warranty. We ship fast worldwide using FedEx, UPS, and DHL.

Core Technical Specifications

• Brand: Bently Nevada
• Model: 3300 NSv Proximity Probe
• Full Part Number: 330904-08-15-10-02-05
• Measurement Range: 1.5 mm (60 mils) linear range
• Sensitivity (Scale Factor): 7.87 V/mm (±12.5%/-20%)
• Linearity (Deviation from DSL): Better than ±0.06 mm
• Frequency Response: 0 to 10 kHz (+0, -3 dB)
• Operating Temperature: -52°C to +177°C
• Probe Tip Material: Chemical-resistant PPS
• Probe Case: Durable AISI 304 Stainless Steel

Installation & Mounting Details

• Recommended Gap Setting: 1.0 mm (40 mils) from target
• Case Thread: M8X1
• Maximum Torque: 0.56 N•m (5 in•lb) – finger tight is sufficient
• Minimum Bend Radius: 25.4 mm (1.0 in)
• Cable Length: 1.0 meter with standard coaxial cable
• Connector Type: Miniature coaxial ClickLoc

Environmental & Mechanical Robustness

• Superior chemical resistance for harsh environments like process compressors
• Robust stainless steel armor protects the cable assembly
• Viton O-ring provides a reliable seal against differential pressure
• Wide temperature range ensures stable performance in extreme conditions

Packaging Information

• New and original Bently Nevada product
• Delivered in secure factory packaging
• Includes the 3300 NSv probe with M8X1 thread and armor

Download Full Technical Datasheet

For complete specifications and wiring diagrams, download the official system datasheet: Download 3300 XL NSv Datasheet PDF.

Frequently Asked Questions (FAQ)

• What is the electrical resistance of this 1.0-meter probe?
  The probe resistance is 4.2 ± 0.5 ohms between the center and outer conductor.
• Can I use this NSv probe to replace an older 3300 RAM probe?
  Yes, the 3300 NSv probe is fully interchangeable with the previous 3300 RAM probe system.
• What is the minimum target size for accurate measurements?
  The minimum recommended target diameter is 13 mm (0.5 inches) for optimal performance.
• How does the frequency response hold up with long cable runs?
  The system maintains a flat response (0 to 10 kHz) with up to 305 meters (1000 feet) of field wiring.
• What is the output voltage range when the probe is correctly gapped?
  The output typically ranges from -1 to -13 Vdc over the linear measurement range.

© 2025 World of PLC Limited. All rights reserved.
Original Source: https://worldofplc.com/
Technical Support Contact: Email: info@worldofplc.com | Phone: +86 158 8020 0923
Partner: PLCDCS HUB Limited | PLC Pioneer Limited