New Bently Nevada 3300 NSv Proximity Probe
This is a brand new and original 3300 NSv proximity probe from Bently Nevada. It comes in its factory packaging with a full 12-month warranty. This advanced sensor is perfect for monitoring vibration and position on turbomachinery. It offers superior chemical resistance for tough industrial environments.
Complete Model Number: 330903-00-03-10-12-00
Our part number is 330903-00-03-10-12-00. Here is what each part means:
- 330903: Base model for 3300 NSv Probe, M8X1 thread, no armor.
- -00-: Unthreaded length is 00 mm.
- -03-: Overall case length is 30 mm.
- -10: Total cable length is 1.0 meter (39 inches).
- -12: Miniature coaxial ClickLoc connector with FluidLoc cable.
- -00: No special agency approvals required.
Technical Data
- Brand: Bently Nevada
- Model: 3300 NSv
- Linear Range: 1.5 mm (60 mils)
- Recommended Gap: 1.0 mm (40 mils)
- Scale Factor: 7.87 V/mm (200 mV/mil)
- Output Signal: -1 to -13 Vdc
- Accuracy (DSL): Better than ±0.06 mm (±2.3 mils)
- Frequency Response: 0 to 10 kHz
- Probe Resistance: 4.2 Ω ± 0.5 Ω for 1.0m cable
- Operating Temperature: -52°C to +177°C (-62°F to +351°F)
- Case Material: 304 Stainless Steel
- Tip Material: Polyphenylene Sulfide (PPS)
- Connector: Miniature Coaxial ClickLoc
- Cable: 75 Ω coaxial, FEP insulated
Installation Guide
- Torque: Finger tight. Do not exceed 0.56 N•m (5 in•lb).
- Minimum Bend Radius: 25.4 mm (1.0 in)
- Target Size: Minimum 8.9mm diameter. Use 13mm or larger for best results.
- For axial measurements on small shafts, reduce the gap to help maintain accuracy.
Compatibility Notes
This 3300 NSv probe is fully compatible with Bently Nevada’s older 3300 RAM proximity probe systems. You can use it as a direct replacement. It also works with standard extension cables and 3300 XL NSv Proximitor sensors.
What’s In The Box?
- One (1) Bently Nevada 330903-00-03-10-12-00 Proximity Probe
- All original factory packaging
Warranty & Support
This product includes a 12-month warranty from the date of purchase. We guarantee it to be new and original.
© 2025 World of PLC Limited. All rights reserved.
Original Source: https://worldofplc.com/
Technical Support Contact: info@worldofplc.com Phone: +86 158 8020 0923
Partner: PLCDCS HUB Limited https://plcdcshub.com/ | PLC Pioneer Limited https://plc-pioneer.com/










Reviews
There are no reviews yet.